Honda Shadow TA200 2001 Manual page 139

CLUTCH/GEARSHIFT LINKAGE
Measure the thickness of the discs.
SERVICE LIMITS: Disc A 2.6 mm (0.10 In)
Disc B 3.3 mm (0.13 in)
NOTE:
Replace the discs and plates as a set.
Clutch plate
Check the plate for excessive warpage or discoloration.
Check the plate warpage on a surface using a feeler gauge.
SERVICE LIMIT: 0.10 mm (0.004 in)
Clutch center
Check the grooves at the clutch center tor damage or wear
caused
by
the clutch plates.
Replace i f necessary.
Clutch outer
GROOVE
Check the clutch outer for nicks, indentations or abnormal
wear made
by
the clutch discs.
Check the serrated teeth of the primary driven gear for wear
or damage.
Clutch outer guide
Measure the clutch outer guide.
SERVICE LIMIT: I.D.: 20.02 mm (0.788 in)
O.D.: 27.93 mm (1.099 In)
9-8