Honda Shadow TA200 2001 Manual page 86

SECON)ARV AIRSUPPLVSVSlEM
PAIR CONTROL VALVE REMOVAL/
INSTALLATION
Remove the following:
- Font side cover (page 2-3)
- Fuel tank (page 2-5)
Remove the PAIR control mount bolts.
Remove the PAIR check valve cover (see below).
Disconnect the air supply hose and vacuum tube from the
PAIR control valve.
Installation i s in the revase order of removal.
PAIR CHOCK VALVE REMOVAL/
INSTALLATION
Remeve the PAIR cntrol valve (see avobe),
Remove the bolts, pulse secondary air injection (PAIR) check
valve cover from the PAIR control valve body.
Check the reed for damage or fatigue.
Replace the PAIR check valve if the seat rubber is cracked,
deteriorated or damaged, or i f there is clearance between the
reed and seat.
Install the PAIR check valve and cover.
Install and tighten the bolts securely.
FUEL SYSTEM
5-17