Honda Shadow TA200 2001 Manual page 143

CLUTCH/GEARSHIFT LINKAGE
Install the oil filter rotor onto the crankshaft.
Install the washer.
Apply oil to lhe lock nut lhreads.
Install the l o ck nut with the chamfered side facing inside.
TOOL:
Gear holder
Tighten the lock nut.
TOOL:
Lock nut wrench, 20 x 24 mm
Remove the gear holder.
07724 - 0010100
07716 - 0020100
TORQUE: 83 N·m (8.5 kgf.m, 61 lbf·ft)
Lock the primary drive and clutch outer gears with the gear
holder.
PRIMARY DFIVE GEAR
REMOVAL/INSTALLATION
Remove the clutch (page 9· 7).
Remove the primary drive gear from the crankshaft.
Remove the woodruff key.
Installation i s in the reverse order of removal.
NOTE:
There i s i d entification color i n primary drive gear and oil pump
gear cover.
Install the primary drive gear which have a same identification
color with oil pump gear cover.
GEARStfTI...NKAGE
REMOVAL
Remove the following:
- Gear shift pedal (page 6-4)
- Ciutch (page 9-3)
Remove the gearsift spindle.
9-12
•..J!II!:,•
I D ENTIFICATION
COLOR
j