Honda Shadow TA200 2001 Manual page 208

REAR WHEEL/SUSPENSION
Apply locking agent to the brake disc bolt threads.
Install the rear brake disc with the stamped mark "MIN. TH
3.SMM" facing outside and i n stall the brake disc bolts.
Tighten the brake disc bolts to the specified torque.
TORQUE: 42 N-m (4.3 kgf-m, 31 lbf-ft)
Install a new dust seal and apply grease to the dust seal l i p.
Install the right side collar.
Do not get grease on the brake disc or stopping power will
be reduced.
Apply grease to the new 0-ring.
Install the wheel damper rubbers and 0-ring i n to the wheel
hub.
Install the driven flange i n to the left wheel hub.
Install the driven sprocket and tighten the nuts.
TORQUE: 64 N-m (6.5 kgf-m, 47 lbf-ft)
Apply grease to the new dust seal lips, then i n stall it in to the
driven flange.
Install the collar.
13-8