Honda Shadow TA200 2001 Manual page 214

Apply thin coat of grease to the swingarm pivot bolt.
Install the swmqarm pivot bolt.
Install and tighten the swingarm pivot nut to the specified
torque.
TORQUE: 88 N-m
(9.0
kgf-m, 65 lbf-ft)
Install the swingarm pivot caps.
Install the shock absorber l o wer mounting bolt.
Tighten the l o wer mounting bolt to the specified torque.
TORQUE: 34 N-m (3.5 kgf.m, 25 lbf-ft)
Install the drive chain cover aligning the slit on the cover with
the tab on the swingarm.
Install and tighten the bolts securely.
13-14
LOWER BOLT