Honda Shadow TA200 2001 Manual page 233

DISASSEMBLY
NOTE:
Do not remove the caliper and bracket pins unless replace-
ment.
Remove the caliper bracket from the caliper body.
Remove the pad spring and bracket pin boots from the cali-
per body.
CALIPER
BOOTS
·
\
HYDRAULIC BRAKE
BRACKET
/
Place a shop towel over the pistons.
Position the caliper body with the pistons down and apply
small squirts of air pressure to the fluid i n let to remove the
pistons.
Do not use high pressure air or bring the nozzle too close to
the inlet.
Push the dust seals and piston seals in and l i ft them out.
CAUTION:
Be careful not to damage the piston sliding surface.
Clean the seal grooves, caliper pistons and caliper piston slid-
ing surfaces
with
clean brake fluid.
PISTON SEAL
DUST SEAL
14-17