Honda Shadow TA200 2001 Manual page 232

HYDRAULIC BRAKE
Connect the brake light switch connectors.
Install the brake hose to the master cylinder.
NOTE:
Be careful not to twist the brake hose.
Install the new sealing washers.
Install and tighten the brake oil bolt to the specified torque.
TORQUE: 34 N-m (3.5 kgf-m, 25 lbf-11)
Refill the brake fluid (page 14-5).
CONNECTORS
OIL BOLT
FRONT BRAKE CALIPER
CAUTION:
Avoid spilling brake fluid on painted, plastic or rubber parts.
Place a rag or shop towel over these parts whenever the
system is serviced.
When removing the oil hose, cover the end of the hose to
prevent contamination.
REMOVAL
Drain the brake fluid (page 14-4).
Remove the brake oil bolt and sealing washers and discon-
nect the brake hose from the front brake caliper.
Remove the front brake caliper bracket bolts and front brake
caliper.
Remove the brake pad (page 14-6).
14-16
BOLTS
CALIPER