Honda Shadow TA200 2001 Manual page 213

REAR WHEEL/SUSPENSION
ASSEMBLY
SWINGARM
DRIVE CHAIN SLIDER
Install the tabs on the chain slider to the holes on the
swingarm.
Install the collars to the drive chain slider.
Apply a l o cking agent to the drive chain slider screws.
Tighten the screws to the specified torque.
TORQUE: 9 N-m
(0.9
kgf-m,
6.5
lbf-11)
INSTALLATION
NOTE:
Route the tubes and wires properly (page 1-22).
Install the swingarm.
Install the brake hose clamp to the swingarm.
Tighten the securely.
SCREWS/COLLARS
13-13