Honda Shadow TA200 2001 Manual page 118

CYLINDER HEAD/VALVES
CYUNDERtEADCOVERICAMSHAFT
NSTALLATION
CYLINDER HEAD COVER ASSEMBLY
Clean the threads of each rocker arm shaft thoroughly.
Apply engine oil to the rocker arms and shafts sliding
surfaces.
Install the rocker arms and shafts in the cylinder head cover.
Install lhe rocker arm shaft plate with the rocker arm shalt
reliefs on the inside.
Tighten the setting screw securely.
ROCKER ARM
INSTALLATION
PLATE
SCREW
Lubricate the camshaft bearings with engine oil.
Install the bearing on the cylinder head.
Install the dowel pins.
Coat a new 0-ring with oil and inslall i t .
Install the cylinder head caver to the cylinder head.
7-16
.Si+
h#i t
CYLINDER HEAD COVER
I