Honda Shadow TA200 2001 Manual page 272

When i n stalling the armature i n to the starter motor case, hold
the armature tightly to keep the magnet from pulling the ar-
mature against the starter motor case.
CAUTION:
The coil may be damaged if the magnet pulls the armature
against the case.
Install the new 0-ring.
Apply thin coat of grease to the armature shaft end.
Push the brush inside the brush holder, i n stall the rear cover
aligning i t s groove with the brush holder tab.
Install the same number of thrust washers i n the same l o ca-
tions as when disassembled.
Install the new 0-ring.
Install the same number of thrust washers i n the same l o ca-
tions as when disassembled.
Install the new 0-ring and front cover.
Apply oil to the 0-ring.
Align the i n dex marks on the starter motor case and front
cover.
THRUST WASHERS
/
S
0-RING
,
0-RING-
ELECTRIC STARTER
ARMATURE
/
REAR COVER
BRUSHES
THRUST WASHERS
INDEX MARKS
17-9