Honda Shadow TA200 2001 Manual page 176

Connect the throttle cables to the throttle grip flange.
Install the right handlebar switch/throttle housing aligning i t s
locating pin with the hole i n the handlebar.
Tighten the forward screw first, then the rear screw.
Install the master cylinder aligning the end of the master cyl-
inder with the punch mark on the handlebar.
Install the master cylinder holder with the "Ul>" mark facing up.
Tighten the upper bolt first, then the l o wer bolt.
Connect the front brake switch wires.
Install the l e ft handlebar switch housing aligning its locating
pin with the hole in the handlebar.
FRONT WHEEL/SUSPENSION/STEERING
RIGHT HANDLEBAR SWITCH
/
12-7