CRANKSHAFT /TRANSMISSION
Remove the crankshaft from the crankcase.
INSPECTION
Measure the side clearance at the connecting rod big end with
a feeler gauge.
SERVICE LIMIT: 0.5 mm (0.02 in)
Measure the radial clearance of the connecting rod big end.
SERVICE LIMIT: 0.05 mm (0.002 in)
Place the crankshaft on a stand or V-blocks and measure the
runout using a dial i n dicator.
SERVICE LIMIT: 0.10 mm (0.004 In)
11-4
CRANKSHAFT
FEELER GAUGE
\
CRANKSHAFT
\\
'