Honda Shadow TA200 2001 Manual page 167

Install the new bearing using the following tools.
Right crankcase mainshaft bearing:
Driver
07749 - 0010000
Attachment, 52 x 55 mm
07746 - 0010400
Pilot, 17 mm
07746 - 0040400
Right crankcase countershaft needle bearing:
Driver 07749 - 0010000
Attachment, 28 x 30 mm
07746 - 0010800
Pilot, 15 mm
07746 - 0040300
Right crankcase crankshaft bearing:
Driver 07749 - 0010000
Pilot, 28 mm 07746 - 0041100
CRANKSHAFT fTRANSMISSION
RIGHT CRANKCASE:
Attachment, 42 x 47 mm
Pilot, 20 mm
07746-0010300
07746 - 0040500
LEFT CRANKCASE:
"'
'
"•
....
--""DRIVER ATTACHMENT
Apply grease to the new countershaft oil seal l i ps and install
it
on the left crankcase.
Left crankcase mainshaft bearing:
Driver 07749-0010000
Attachment, 32 x 35 mm 07746-0010100
Pilot, 15 mm
07746 - 0040300
Left crankcase countershaft bearing:
Driver
07749-0010000
Set the bearing set plate.
Apply locking agent to the bolt and tighten the bearing set
plate socket bolt to specified torque.
TORQUE: 22 N-m (2.2 kgf-m, 16 lbf-ft)
11-9