Honda Shadow TA200 2001 Manual page 245

NOTE:
Be careful not to twist the brake hose.
Install and lighlen the brake oil bolt to the specified torque.
TORQUE: 34 N-m (3.5 kgf.m, 25 lbf·fl)
NOTE:
While tightening the brake hose oil bolt, align the brake hose
end with the stopper.
BOLT
-
SEALING WASHER ·.
HYDRAULIC BRAKE
Connect the brake hose to the rear master cylinder with new
r
sealing washers.
Refill the brake fluid and bleed the rear hydraulic system (page
14-5).
BRAKE PEDAL
REMOVAL
Remove the brake light switch return spring.
Remove the brake pedal return spring.
Remove the cross prate bolts.
Remove the main slap bolts, collar, step guard and main step.
Remove the cotter pin from the lower joint.
Remove the cotter pin and washer from the brake pedal.
Remove the brake pedal.
14-29