Honda Shadow TA200 2001 Manual page 109

CYLINDER HEADNALVES
Remove the bolts, carburetor insulator and 0-ring.
, » -
I N SULATOR
+...... - -
l- 0-RING
,
BOLTS
CYUNDERHEADasASSEIVIBLY
Remove the gasket and dowel pins from the cylinder.
GASKET
NOTE:
Remove the valve stem seals and valve spring seats.
Remove the valve spring cotters, retainers, springs and valve
using the special tool as shown.
07757 - 0010000
To prevent loss of tension, do not compress the valve springs
more than necessary to remove the cotters.
Mark all parts during disassembly, so they can be placed back
in their original locations.
TOOL:
Valve spring compressor
CAUTION:
Remove carbon deposits from the combustion chamber.
Check the spark plug hole and valve areas for cracks.
7-7