Honda Shadow TA200 2001 Manual page 119

Install the new sealing washers and the cylinder head cover
cap nuts .
Install the cylinder head cover bolts.
Tighten the cap nuts and bolts in a crisscross pattern m 2 or
3 step.
TORQUE:
Cylinder head cover cap nut : 27N-m (2.8 kgf.m, 20 lbt-ft)
Cylinder head cover socket bolt : 12N-m (1.2 kgf-m, 9 lbf-ft)
CYLINDER HEADNALVES
Align the
"T"
mark and i n dex line on the flywheel with the
index notch on the left crankcase cover by turning the crank-
shaft counterclockwise.
INDEX NOTCH
'T'
MARK
INDEX MARK
Install the cam sprocket with i t s timing mark facing out.
Install the cam chain on to the cam sprocket.
Align the timing mark on the cam sprocket with the mating
surface of the head and cover, without rotating the crankshaft.
Install the tighten the cam sprocket bolts to specified torque.
TORQUE: 12 N-m (1.2 kgf.m, 9 lbf.ft)
ALIGN
7-17