Honda Shadow TA200 2001 Manual page 145

CLUTCH/GEARSHIFT LINKAGE
Install the knock pin.
Hold the gearshift stopper arm with the screwdriver, and Align
the hole al gear shift drum sloper plate and knock pin.
Install and tighten the bolt securely.
lnslall the washer onlo lhe gearshafl spindle .
Install the gearshift spindle with the spindle return spring
attached to the lug on the crankcase securely.
RGHTCRANKCASECAVER
INSTALLATION
ASSEMBLY
Install the right crankcase rubber damper.
Install the right crankcase cover plate and Tighten the bolts.
Apply engine oil to the clutch lifter arm and dust seal l i p.
Apply engine oil to the clutch lifter arm sliding surfaces and
slit.
Install the clutch lifter arm.
9-14