Honda Shadow TA200 2001 Manual page 68

Install the outer and i n ner rotors to the rotor shaft.
INNER ROTOR
LUBRICATION SYSTEM
Fill the oil pump with engine oil.
SCREWS
Install the pump caver.
NOTE:
Align the boss of the pump caver and hole of the pump body.
Install and tighten the screws to the specified torque.
TORQUE: 3 N-m (0.3
kgf-m,
2.2 lbf-ft)
Check for smooth operation of the oil pump.
ALIGN
OIL PUMP COVER
INSTALLATION
Apply engine oil to new 0-rings and i n stall i n to the crank-
case.
Install the oil pump and tighten the screws to the specified
torque.
TORQUE: 1.0 N-m (1.0 kgf-m, 7 lbf,ft)
Install the engine oil filter rotor (page 9-12).
Install the right crankcase cover (page 9-15).
4-5