Kyocera TASKalfa 7002i Service Manual page 1432

Step Check description
2 Checking the network
3 Checking the network
4 Checking the network
5 Checking the network
6 Restarting up
(12)Print output is unavailable due to the network factor
The cable between the main unit and the PC is not properly connected.
Step Check description
1 Checking the cable
2 Restarting up
3 Checking the Ethernet
cable
4 Changing the connection
(13)Print output is unavailable due to the network factor
The access point (router or HUB) in the network does not operate properly.
Step Check description
1 Restarting up
Assumed cause
There is trouble in the net-
work.
There is trouble in the net-
work.
There is trouble in the net-
work.
There is trouble in the net-
work.
The PC or the main unit
locks up.
Assumed cause
The cable between the
main unit and the PC is not
properly connected.
The main unit or the PC
does not properly start up.
The Ethernet cable is
faulty.
Another network is faulty.
Assumed cause
The router or the HUB
does not properly activate.
7-572
Measures
When the printing error
appears on the operation
panel or the PC screen, clear
the error caused by the toner
or paper jam, etc.
Check the main unit IP
Address in the status page,
etc. and then check if Com-
mand Center can be opened
using that IP Address. If not,
reconfigure the network
again.
Check the internet connec-
tion and restore the network
connection if necessary
Check the cable and reset
the router or HUB.
Restart the PC or the main
unit, and print out again.
Measures
Check the cable connection
between the main unit and
the PC.
Restart the main unit and
then restart the PC.
Replace the Ethernet cable.
Directly connect the main unit
to the PC with the cross cable
and then check if the same
data can be printed out.
Measures
Check if the link lamp of the
router or hub is lit and restart
it.
2WA/2NJ/2RK
Reference
?
Reference
Reference