Displays The Network Zone List For Appletalk - Nortel 2000 Software Reference Manual

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-160
Table C-51. Arguments for the netstat Command (continued)
Argument Description
–s Displays network protocol statistics. LAT statistics display
only if the correct lat_key value is set. AppleTalk statistics
display only if the correct option_key value is set.
–rs Displays routing statistics.
–t Displays the default active connection information along with
the attached device name.
–x Displays information about IPX.
–xi Displays information about Remote Annexes currently in use
for dial-in or LAN-to-LAN routing.
–x? Displays information about using the netstat –x command.
–xm Displays information about the amount of memory available in
the large and small IPX buffer pools.
–xr Displays the routes defined in the Remote Annex's IPX routing
table.
–xr Displays the Remote Annex route for that network.
network_
number
–xs Displays server names, types, and addresses.
–xs Displays information for the specified server (the server_name
server_ argument is case-sensitive).
name
–xS Displays the Remote Annex route for each server.
–xS Displays the Remote Annex route for the specified server (the
server_ server_name argument is case-sensitive).
name
–z

Displays the network zone list for AppleTalk.

Book C