Nortel 2000 Software Reference Manual page 172

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-154
A Key prompt appears after the port is locked and remains until you enter
the correct password. For example
annex: lock
Key:
Again:
Remote Annex port 3 locked
Key:
The password never displays with the Key or Again prompts.
The lock command permits you to define a time-out. This is the amount
of time in minutes that the port is locked. After passing this limit, the
Remote Annex resets and unlocks the port (like hangup). For example:
annex: lock 60
Entering the Remote Annex's administrative password, or resetting the
port, unlocks the port.
ls
The superuser ls command displays the image name along with revision
information for the operational image stored in the self-boot ROM. The
syntax is:
ls
The ls command displays three fields from each file:
• The size in bytes.
• The last modified date.
• The file name.
Book C