Nortel 2000 Software Reference Manual page 270

Chapter 5 Software Reference Guide
Remote Annex Administrator's Guide for UNIX
Book C-252
Parameter Values
chap_auth_ A string of 1–16
name characters
char_erase Y or N
circuit_timer 1–25
cli_imask7 Y or N
cli_inactivity 0–254,
immediate, or off
cli_interface vci or uci
cli_prompt coded string of
up to 16 codes
cli_security Y or N
config_file user-defined
Default Description
chap Defines the entry
used for the Name
field of a CHAP
challenge.
Y Enables/disables
echoing character
erase for a CRT.
8 The time interval in
(80 ms) tens of milliseconds
between the
transmission of
LAT packets.
Y Enables/disables
masking eight-bit
CLI input to seven
bits.
0 (off) Sets the amount of
time that the Annex
waits before hanging
up the port after it
becomes idle.
uci Allows you to
control the prompt
that appears for
VMS or UNIX
environments.
%a%c Customizes the CLI
prompt.
N Enables/disables
CLI security for an
Annex.
config. Specifies the name
annex of the configuration
file.
Book C