Nortel 2000 Software Reference Manual page 325

Book C
Parameter
reset_idle_time_on
short_break
slip_allow_dump
slip_load_dump_host
slip_mtu_size
slip_no_icmp
slip_ppp_security
slip_tos
speed
subnet_mask
Values Default
input or input
output
Y or N Y
Y or N Y
Internet 0.0.0.0
address
small or small
large
Y or N N
Y or N N
Y or N N
autobaud, 50, 9600
75, 110,
134.5, 150,
200, 300, 600,
1200, 1800,
2000, 2400,
3600, 4800,
7200, 9600,
19200, 38400,
57600,
115200
subnet mask 0.0.0.0
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Resets the idle timer on input or
output.
When enabled, the Annex
returns the user to the CLI
prompt after receiving a break
shorter than two seconds.
Enables/disables dumping across
a SLIP link.
Defines the host from which the
Annex receives a load or to
which the Annex dumps over the
SLIP link.
Forces SLIP interface to use
large (1006) or small (256)
maximum transmission units.
Discards any ICMP packets
directed to the SLIP link.
Enables/disables access to the
slip and ppp commands from the
CLI.
When enabled, the Annex sends
interactive traffic before any
other traffic.
Defines the speed of the
asynchronous line between the
device and the Annex.
Defines the subnet mask for an
async SLIP/PPP interface.
Book C-307