Nortel 2000 Software Reference Manual page 268

Chapter 5 Software Reference Guide
Remote Annex Administrator's Guide for UNIX
Book C-250
Parameter Values
allow_snmp_ Y or N
sets
arap_v42bis Y or N
at_guest Y or N
at_nodeid 0.0 to 65534.254
at_security Y or N
attn_string control char.
sequence
authoritative_ Y or N
agent
authorized_ optional code
groups range within 0 to
255 followed by
"enabled" or
"disabled"
Default Description
N Enables/disables
SNMP sets to the
Annex.
Y Enables V.42bis
compression during
an ARAP session.
N Allows guests to log
into an ARAP
service.
0.0 Defines the node ID
given to an ARA
client during
connection
establishment.
N Enables ACP service
for the port.
"" Defines a control
character sequence
virtual as an attention
CLI=^ character or string.
A
Y Enables the Annex
to reply to an ICMP
Address Mask
Request.
disabled Specifies which LAT
remote group codes
are accessible to
users on a particular
Annex port.
Book C