Table C-10. Keywords For The Reset T1 Command - Nortel 2000 Software Reference Manual

Book C
Table C-9. Keywords for the reset Command (continued)
Keyword Definition
annex syslog Resets the syslog subsystem. The syslog subsystem does not
use any changes made to the syslog_port parameter.
interface Resets the interface parameters. The syntax is:
reset interface [interface_set | keyword.
printer Resets the parallel printer port. The syntax is:
reset printer [printer_set | keyword]
serial Resets all serial ports.
virtual Resets all virtual CLI connections.

Table C-10. Keywords for the reset t1 Command

Keyword Definition
soft This setting reconfigures the software parameters and will only
disrupt the service on the DS0 channels that are changed.
hard This setting resets the T1 engine causing the T1 Drop/Insert
interface and modem sessions to terminate.
I
f modem sessions and/or equipment are attached to
the Drop and Insert Interface, their service will be
interrupted for a short period of time (usually a few
esf This setting resets all the statistics in the T1 engine.
Remote Annex Administrator's Guide for UNIX
Chapter 1 na Commands
Book C-23