Nortel 2000 Software Reference Manual page 307

Nortel remote annex 2000 server: reference guide
Hide thumbs Also See for 2000:
Table of Contents

Advertisement

Book C
Parameter
tftp_dump_name
tftp_load_dir
time_broadcast
time_server
timezone_minuteswest
tmux_delay
tmux_enable
Values
Default
string
host-
dependent
string
host-
dependent
Y or N
N
loopback
0.0.0.0
address, 0.0.0.0,
127.0.0.1, host
address,
broadcast
address
+ or - number
300
0–255 ms
20
Y or N
N
Remote Annex Administrator's Guide for UNIX
Chapter 5
Software Reference Guide
Description
Provides the name of
the file to use when
dumping the core
image using tftp if the
Annex operational
image and erpcd fail.
The string prepended
to the image, motd, and
configuration file
names for tftp
transfers.
Enables/disables
broadcasting for a
time server host in case
the preferred load host
is not available.
Determines whether or
not the Annex queries
for time service.
Sets the time zone by
number of minutes east
or west (+/-) of GMT.
Defines the maximum
number of
milliseconds during
which small packets
can accumulate to form
larger packets. When
the time expires, the
Annex sends the
multiplexed packet.
Controls whether or
not an Annex uses
TMux to multiplex
small TCP packets
into a single IP packet.
Book C-289

Advertisement

Table of Contents
loading

This manual is also suitable for:

4000539061005391

Table of Contents