Table C-58. Arguments For The Queue Command - Nortel 2000 Software Reference Manual

Book C

Table C-58. Arguments for the queue Command

Argument Description
–h Displays only the entries originating from the hostname.
–s Displays only the entries requesting service.
–p Displays only the entries requesting connection to port.
–r Removes the entry associated with entry_id from the queue. Do
not combine this argument with another argument.
–v Displays the service_name and the port_number for each queued
service that is available.
Entering the command without arguments displays all the requests in the
queue. For each entry, queue displays the service_name and the
port_number requested (if specified), the host requesting the service, the
entry_id assigned to each queued request, the time (in minutes) that the
request has been waiting in the queue, and the request's position in the
queue.
The queue command display looks like this:
annex: queue
position
in queue host (from)
1 vax_marketing lab_printer
3 vax_sales
4 vax_marketing modem_pool
7 annex_lab
Queue positions 2, 5, and 6 are not displayed because they are being
used for non-LAT requests.
Remote Annex Administrator's Guide for UNIX
Chapter 3 Using the CLI Commands
port
service (to) (to)
10
laser_printer 8
-
modem_test 2
time
(min) entry id
17 538
11 384
8 82
2 611
Book C-175