Nortel 2000 Software Reference Manual page 299

Book C
Parameter
enable_security
facility_num
group_value
host_table_size
image_name
inet_addr
ipencap_type
ip_forward_broadcast
ipx_do_checksum
ipx_dump_password
ipx_dump_path
Values Default
Y or N N
0–32767 0
optional code disabled
range within 0 -
255, followed by
"enabled" or
"disabled"
1–255, 64
(255=unlimited,
254=none)
host file name; ""
up to 100
characters.
Internet address no default
ethernet or ethernet
ieee802
Y or N N
Y or N N
0–16 chars. <unset>
0–100 chars. No default
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Enables/disables
security subsystem.
Identifies a LAT host
by number.
Security mechanism
that restricts access to
LAT services for all
users on the Annex.
Sets the maximum
number of entries in
the host table.
Specifies the name of
the file containing the
Annex's operational
code.
Sets the Annex's
Internet address.
Sets the IP
encapsulation type.
Enables the Annex to
scan the interface list
and copy broadcast
packets.
Controls whether or
not the Annex enables
an IPX checksum.
Controls whether or
not the Annex enables
an IPX checksum.
Specifies the full
pathname that stores
the uploaded Annex
dump image on the
Novell file server.
Book C-281