Table C-12. Keywords For The Show Interface Command - Nortel 2000 Software Reference Manual

Book C
Table C-11. Keywords for the show annex Command (continued)
Keyword Parameters
nameserver nameserver_broadcast, rwhod, pref_name1_addr,
pref_name2_addr, name_server_1, name_server_2,
host_table_size, min_unique_hostnames
router rip_routers, rip_auth
security enable_security, security_broadcast, pref_secur1_host,
pref_secure2_host, network_turnaround, acp_key,
password, allow_snmp_sets, loose_source_route,
lock_enable, passwd_limit, chap_auth_name
syslog syslog_mask, syslog_facility, syslog_host, syslog_port
time time_broadcast, daylight_savings, timezone_minuteswest,
time_server
tmux tmux_enable, tmux_max_host, tmux_max_mpx,
tmux_delay
vcli max_vcli, cli_prompt, vcli_security, vcli_password

Table C-12. Keywords for the show interface Command

Keyword Description
all Displays all interface routing parameters (rip_send_version,
rip_horizon, rip_next_hop, rip_sub_accept, rip_accept,
rep_recv_version, rip_default_route, rip_sub_advertise,
rip_advertise).
asyn Displays all interface routing parameters for this asynchronous
port.
asyn–n Displays all interface routing parameters for this range of
asynchronous ports.
en0 Displays all interface routing parameters for this Ethernet
interface.
Remote Annex Administrator's Guide for UNIX
Chapter 1 na Commands
Book C-27