Pref_Secure1_Host; Pref_Secure2_Host; Printer_Crlf; Printer_Host - Nortel 2000 Software Reference Manual

Chapter 2 Configuration Parameters Book C

pref_secure1_host

This Annex parameter specifies the IP address of the security server to
which the Annex first sends security requests. This parameter works only
if the enable_security parameter is set to Y. The default is 0.0.0.0.

pref_secure2_host

This Annex parameter specifies the IP address of the host that is the
back-up server if the host specified in pref_secure1_host is not available.
This parameter works only if the enable_security parameter is set to Y.
The default is 0.0.0.0.

printer_crlf

This parallel printer port parameter converts a carriage return to a carriage
return followed by a line feed before it is sent to the printer. When
disabled, a carriage return translates to a carriage return followed by a
null string. A Y enables this parameter, an N disables it. The default is N.

printer_host

This asynchronous port parameter specifies the IP address or fully
qualified domain name of a machine running a Berkeley-style lpd server.
The tn3270 command uses this server for the print-screen function (for
more details, see tn3270 on page A-214). The default is 0.0.0.0.
Remote Annex Administrator's Guide for UNIX
Book C-94