Table C-40. The Superuser Admin Command Set - Nortel 2000 Software Reference Manual

Book C

Table C-40. The Superuser admin Command Set

Command Description
broadcast Sends a broadcast message to one or more ports.
help or ? Displays the admin help screen.
port Enters the default port_set.
printer Enters the default printer_set.
quit Terminates the admin session.
reset Resets a port, interface, or subsystem.
set Modifies the value of a configuration parameter.
show Displays the current value of a configuration parameter.
These CLI admin commands function like their na counterparts, with
the following exceptions:
• The CLI admin commands function only on the local Remote
Annex.
• When issuing admin with command line arguments (not as a
subsystem) you must include the port_set.
• The help command provides a help summary only for the CLI
admin command set. Entering help command_name indicates
the command's syntax.
• The reset command does not reset the connection from which
the reset is issued. To reset your port or connection, return to the
CLI and issue hangup.
• If the reset command is issued without arguments, it asks if the
user wishes to reset the default port_set. Only one character is
expected as input (Return, y, or Y resets the default port_set,
and any other response terminates the command).
Remote Annex Administrator's Guide for UNIX
Chapter 3 Using the CLI Commands
Book C-133