Motd_File; Multicast_Timer; Multisessions_Enable (Annex; Multisessions_Enable (Asynchronous Port - Nortel 2000 Software Reference Manual

Chapter 2 Configuration Parameters Book C
motd_file
This Annex parameter defines the file name for the message-of-the-day
file maintained on the load host. The string size ranges from 0 to 16
characters. The default file name is motd; the file resides in the directory
chosen during the host installation process (typically
/usr/spool/erpcd/bfs).

multicast_timer

This Annex parameter defines the number of seconds that can elapse
between service announcement transmissions for the LAT protocol.
Allowable values range from 10 to 180 (seconds). The default is 30.

multisessions_enable (Annex)

This Annex parameter allows multisessions to be managed on a terminal
server basis. When enabled, terminals that support DEC's Terminal
Device/Session Management Protocol (TD/SMP) can display two active
windows simultaneously over one communication line. A Y enables this
parameter, an N disables it. The default is N.

multisessions_enable (asynchronous port)

This asynchronous port parameter allows multisessions to be managed
on a per port basis. A Y enables this parameter, an N disables it. The
default is N.
Remote Annex Administrator's Guide for UNIX
Book C-78