Nortel 2000 Software Reference Manual page 319

Book C
Parameter
control_lines
data_bits
dedicated_address
dedicated_arguments
dedicated_port
default_session_mode
do_compression
echo
erase_char
erase_line
erase_word
Values Default
modem_ none
control,
flow_
control,
both, none
5, 6, 7, or 8 8
Internet 0.0.0.0
address
""
100-char.
string
telnet, rlogin, telnet
TCP port
number
interactive, interactive
passthru,
passall,
transparent
Y or N N
Y or N Y
control char. ^?
sequence ( key)
DEL
control char. ^U
sequence
control char. ^W
sequence
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Specifies the type of hardware
control lines used on the port.
Defines the number of data bits
in a character; does not include
start, stop, or parity bits.
Defines the host to which a
dedicated port connects.
Defines the command line
arguments used for dedicated
ports. Use with the mode and
dedicated_port parameters.
Specifies application or TCP port
number to which a dedicated
port connects.
Defines the default session
mode when the VMS interface is
configured (i.e., when
cli_interface is set to vci).
Starts TCP/IP header
compression on the SLIP link.
Enables/disables local character
echoing.
Defines the character erase
character.
Defines the line erase character.
Defines the word erase character.
Book C-301