Nortel 2000 Software Reference Manual page 219

Book C
Table C-65. Setting Parameters Using stty (continued)
Parameter Description
olower Controls case conversion for characters sent from the
–olower Remote Annex to the terminal. Setting olower converts
lower case characters to upper case. The default,
–olower, does not change case.
ostartc Sets the restart output character. The default is
character
ostopc character Sets the stop output character. The default is
parity argument Type of parity checked on input and generated on output.
Possible values are: none, even, or odd. The default is
none.
prompt code Changes the CLI prompt. The prompt is specified as
alphanumeric characters and embedded formatting
codes that are expanded when the prompt is displayed.
The formatting codes consist of a percent character (%)
followed by a single lower case character. The default is
%a%c (annex:). The formatting codes are:
%a The string annex.
%c A colon followed by a space.
%d The current date and time in standard UNIX format,
such as Mon Mar 14 13:59:42 1988.
%i The Remote Annex's IP address.
%j A new line character; skip to the beginning of the next
line.
%l The location defined for the port or the string port nn.
%n The Remote Annex's name or IP address.
%p The port number.
(continued on next page)
Remote Annex Administrator's Guide for UNIX
Chapter 3 Using the CLI Commands
CTRL-S
.
CTRL-Q
.
Book C-201