Nortel 2000 Software Reference Manual page 282

Chapter 5 Software Reference Guide
Remote Annex Administrator's Guide for UNIX
Book C-264
Parameter Values
need_dsr Y or N
net_inactivity 0–255
net_inactivity_ minutes or
units seconds
network_ 1–255
turnaround
newline_ Y or N
terminal
Default Description
N For use with a
modem connected
to a slave port.
When enabled, the
connection fails if
no DSR signal is
present; when
disabled, the Annex
accepts the
connection, but
waits for DSR and
DCD before
communicating
with the modem.
0 Defines the amount
of time an
asynchronous port
can remain inactive
before the port is
reset.
minutes Defines the units of
time used for the
port's inactivity
timer.
2 Sets the number of
seconds to wait for
an answer from a
security host.
N Interprets carriage
returns and line
feeds at the CLI
level.
Book C