Nortel 2000 Software Reference Manual page 283

Book C
Parameter Values
node_id 0 to 65534.254
option_key unique value
output_flow_ eia, start/stop,
control bell, both, none
output_is_ Y or N
activity
output_start_ control char.
char sequence
output_stop_ control char.
char sequence
output_ttl 1–255
parity even, odd,
none
password <unset> or
a string
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Default Description
0.0 Contains the
address an Annex
tries to acquire at the
start of an AppleTalk
session. If this
address is in use, the
Annex must acquire
a new node ID. This
new ID is stored in
non-volatile RAM.
no default Enables ARA,
tn3270, filtering,
and dial-out routing.
start/stop Defines method of
flow control that the
terminal uses to
stop output from the
Annex.
N Defines activity as
output.
^Q Defines the
character that
restarts output.
^S Defines the control
character sequence
that stops output.
64 Defines a
locally-generated
packet's
time-to-live on the
network.
none Defines the type of
parity that the device
uses.
<unset> Sets the Annex's
administrative
password.
Book C-265