Nortel 2000 Software Reference Manual page 277

Book C
Parameter Values
lat_key unique value
lat_queue_max 1–255 or none
latb_enable Y or N
line_erase Y or N
load_broadcast Y or N
load_dump_ Internet address
gateway
load_dump_ net, slnn, self
sequence
local_address Internet
address
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Default Description
no default Enables/disables the
LAT protocol as
well as LAT-specific
Annex parameters.
4 Limits the number
of HIC requests that
the Annex can
queue.
N Enables the Annex
to decode a LAT
host's data-b packet.
Y Enables/disables
echoing line erase
for a CRT.
Y Enables/disables
broadcasting for
files other than the
image if one or all
are not available.
0.0.0.0 Specifies the
gateway's Internet
address. A gateway
is required if the
preferred load or
dump host is
located on a
different network or
subnet than the
Annex.
net Defines the network
interface(s) for use
when loading and
dumping.
0.0.0.0 Defines the Internet
address for the port
(Annex side of link).
Book C-259