Maintaining The Onboard Video And Network Cards - Nortel 1002rp Maintenance And Diagnostics

Maintaining the Pentium III SBC card
Maintaining the onboard video and
network cards
Network card failure
The network cards are integrated into the SBC card. If the network cards
fail, they cannot be replaced by add-in network cards in the expansion
slots.
Video card failure
The video cards are integrated into the SBC card. If the video cards fail,
they cannot be replaced by add-in video cards in the expansion slots.
Indicators for video card failure
If the monitor appears to be functioning but no display is visible, look for
the following indicators of video card malfunction:
Brightness and contrast are set at normal level.
The server is powered on, and one long beep is followed by two
short beeps.
The floppy drive light goes on when the server is powered, but no
display is visible on the monitor.
The floppy drive light comes on when you type dir a: and press
Enter, but no display is visible on the monitor.
210
Standard 1.11
CallPilot