Configuration Parameters; Parameter Conventions - Nortel 2000 Software Reference Manual

Book C

Parameter Conventions

T
he configuration parameters define the operating characteristics for
a given Annex. There are three ways in which you can configure and
manage these parameters:
• The host-based na utility sends requests to the Annex to read,
set, reset, show, or copy configuration parameters (for more
details, see na Commands on page Book C-1).
• The CLI admin command is a counterpart of na that runs
locally on the Annex.
• The SNMP agent included in the Annex software provides MIB
objects that can be read and set by a standard SNMP
management station; these MIB objects correspond to the
configuration parameters (for more details, see Simple Network
Management Protocol (SNMP) on page Book B-41).
This chapter includes the following sections:
• Parameter Conventions.
• Parameter Descriptions.
This section describes the conventions for entering parameter values and
returning those values to the supplied defaults.
Remote Annex Administrator's Guide for UNIX
Configuration Parameters
Chapter 2
Book C-33