Table C-63. Arguments For The Stats -T Command - Nortel 2000 Software Reference Manual

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-188

Table C-63. Arguments for the stats -T Command

Argument Description
current Displays current T1 statistics information for the current
15-minute interval.
total Displays the summary of T1 statistics information for the
last 24 hours.
all Displays the T1 statistics for each one of the valid
intervals. There are up to 95 intervals (15 minutes per
interval) for a 24-hour period.
interval _set Displays the T1 statistics for the selected intervals only.
You can enter a single interval or a range of intervals from
1 to 96. Interval 1 is the most recent interval. For example:
stats -T 4-6, 10 displays intervals 4, 5, 6, and 10.
clear_alarm Clears the alarm condition saved in the history buffer.
Once the alarm history buffer is cleared, the next alarm
event is captured and stored in the history buffer.
Subsequent alarm events will not overwrite the history
buffer. This option is available only to the Superuser.
All T1 statistics are captured in 15-minute periods. Information on
intervals being captured is kept in "current." Once the 15-minute interval
expires, the information in "current" is transferred to interval #1, and the
current statistics are cleared before restarting the statistics capture
process. All intervals are aged every 15 minutes. Interval n becomes n+1,
and interval 96 is discarded. The 96 intervals cover a
24-hour period. Interval #1 becomes valid only after the T1 engine has
been on-line for at least 15 minutes.
Book C