Table C-97. Na Commands - Nortel 2000 Software Reference Manual

Chapter 5 Software Reference Guide
Command
annex
boot
broadcast
copy annex
copy interface
copy [port|
asynchronous]
copy printer
dumpboot
echo
help or ?
interface
password
Remote Annex Administrator's Guide for UNIX
Book C-318

Table C-97. na Commands

Arguments
annex_list
[–adhlq] [time] [filename] [warning] Reboots the Annex. Only
=[port_set | =broadcast_keyword
[@annex_identifier]] message
annex_identifier annex_list
interface_name@annex_identifier
port_set
port_number@
annex_identifier port_set
@annex_identifier annex_list
[–aq] [[+] [HH:] [MM]]
annex_list filename warning
message
command
interface_set | all
Description
Sets the default annex_list.
ROM revisions 0600 and
greater with the self-boot
option installed support the
–l argument.
Sends a broadcast message to a
port(s).
Copies Annex parameters to
other Annexes.
Copies all interface parameters
from the specified interface to
the interface_set.
Copies port parameters except
the port password from the
specified asynchronous port to
the port_set.
Copies printer parameters to
multiple printer ports.
Boots an Annex and produces
an up-line dump.
Echoes the remainder of the
line to standard output.
Displays command syntax.
Groups interfaces in an
interface_set, allowing you to
issue one na command to
change parameter values for
all interfaces in the group.
Enters the default password.
Book C