Nortel 2000 Software Reference Manual page 324

Chapter 5 Software Reference Guide
Parameter
ppp_ipx_node
ppp_mru
ppp_ncp
ppp_password_remote
ppp_security_protocol
ppp_username_remote
printer_host
printer_name
prompt
ps_history_buffer
redisplay_line
remote_address
Remote Annex Administrator's Guide for UNIX
Book C-306
Values Default
00000000000 Ethernet
0 to address
fffffffffffe plus one
64–1500 1500
ipcp, atcp, all
ipxcp, mp,
ccp, all
<unset> or <unset>
a string
pap, none
chap,
chap-pap,
none
<unset> or <unset>
a 1 - 15
character
string
Internet 0.0.0.0
address
valid name no default
string of up %a%c
to 16 codes
0–32767 (0 = 0
disabled)
control char. ^R
sequence
Internet 0.0.0.0
address
Description
Specifies a string of 12
hexadecimal digits representing
the 6-byte, non-zero node
number the Annex suggests for
the node number of the remote
PC client on an IPXCP (IPX over
PPP) link.
Defines the maximum receive
unit used with PPP.
Specifies which protocol(s) run
on the interface.
Defines a PPP port user's
password as a string.
Enables password
authentication protocol for PPP
ports.
Defines the PPP port user's name
as a string.
Specifies the IP address or fully
qualified domain name of a
machine running a
Berkeley-style lpd server.
Specifies the name of the printer
to which dumps are sent.
Defines a port-specific CLI
prompt.
Specifies how much data to
buffer on a slave port.
Defines the reprint line character.
Defines the Internet address for
the host at the other end of the
serial line.
Book C