Nortel 2000 Software Reference Manual page 203

Book C
Table C-62. Arguments for the stats Command (continued)
Argument Description
–m time Displays statistics for both active and inactive control lines,
pausing between each display the number of seconds specified
by time.
–p Displays parallel printer statistics for all connected printers,
including the printer type, number of characters transmitted, and
printer status. You can specify the printer by number.
–o Displays the status of the Remote Annex keyed options and
disabled modules.
If you specify a time interval, the Remote Annex ignores an attention
string that contains multiple characters.
The stats command display looks like this:
annex: stats
S/W Version: Remote Access Rx.x Build #2: Thu Sep 14 20:37:27 EDT 1995
H/W: Remote Remote Annex 4000
Comm: eth-aui&twi/64asy/1par
Boot from: 132.245.88.5
Image: oper.46.enet
Inet addr: 132.245.88.170
Ethernet addr:00-80-2d-00-b4-42 Broadcast addr: 132.245.88.255
Default domain: <unknown>
CPU current/average = 1%/0% procs active/max/limit = 87/88/800
rescheds = 0/32
Loading:
CPU current/average = 1%/0% procs active/max/limit = 87/88/800
rescheds = 0/32
Mbufs:
total=5400 free=3273
Serial Ports:
Total bytes: rcv'd=24982
Errors: parity=0
Parallel Ports:
Total bytes: xmt'd=0
(continued on next page)
Remote Annex Administrator's Guide for UNIX
Chapter 3
H/W Rev: 36. ROM Rev 0811.
Mem: 5mDRM/64kEEPRM/16kSL1/16kSL2
Date: Thu Sep 21 13:27:50 1995 EDT
Uptime: 15 hours 48 mins
Subnet mask: 255.255.255.0
switches = 48/109401
switches = 48/109401
minimum free=3200
xmt'd=5934
framing=0 fifo overruns=0
Using the CLI Commands
activates = 49/109722
activates = 49/109722
denied=0
Book C-185