Nortel 2000 Software Reference Manual page 142

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-124
Table C-37. CLI Commands (continued)
Command Type
jobs user
kill user
lock user
ls superuser
modem superuser
mv superuser
netstat user
passwd superuser
ping superuser
ppp user
procs superuser
queue user
rlogin user
rm superuser
route superuser
services user
slip user
(continued on next page)
Description
Displays a list of current jobs.
Terminates a job.
Locks a port.
Displays the self-boot ROM's directory.
Displays the modem types supported by the
Remote Annex.
Renames a file in the local file system.
Displays network statistics.
Changes the administrative password.
Sends ICMP Echo Request packets to a host.
Converts a CLI port to a PPP interface port.
Displays processes at the Remote Annex.
Displays information about queued HIC requests
or removes a particular HIC request from the
queue.
Connects to a host using the rlogin protocol.
Deletes a file in the local file system.
Adds/deletes routes to/from the active routing
table.
Displays the LAT services that have been
advertised by LAT nodes.
Converts a CLI port to a SLIP interface port.
Book C