Nortel 2000 Software Reference Manual page 25

Book C
The following example creates an annex_list containing one Annex with
the Internet address 132.245.6.40:
command: annex 132.245.6.40
The following example creates an annex_list containing two Annexes
–one specified by its IP address, and the other specified by its name:
command: annex 132.245.6.40,frontlobby
The following example shows how na prompts for missing arguments:
command: annex
enter default annex list: 132.245.6.40,frontlobby
The following annex command displays a message identifying the
specified Annex, its Internet address, the number of serial lines it has,
and its software version:
command: annex 132.245.6.1
132.245.6.1: Remote Annex Rx.x,72 ports
The following annex command causes an Annex to prompt for an
administrative password, provided that the password has been set and
security has been enabled:
command: annex frontlobby
Password for 132.245.6.40 <frontlobby>
frontlobby: Remote Annex Rx.x,72 ports
If you use the na command password to define a default password for
this na session, and that password matches the Annex administrative
password, no password prompt appears and normal processing
continues (see password on page A-17).
Remote Annex Administrator's Guide for UNIX
Chapter 1 na Commands
Book C-7