Nortel 2000 Software Reference Manual page 143

Book C
Table C-37. CLI Commands (continued)
Command Type
stats user
stats –c superuser
stats –T user
stty user
su superuser
t1_loopback superuser
tap superuser
telnet user
tn3270 user
who user
Remote Annex Administrator's Guide for UNIX
Chapter 3 Using the CLI Commands
Description
Displays Remote Annex statistics.
Clears all serial line statistics to zero.
Displays T1 network interface statistics.
Displays and modifies CLI port parameters.
Enters and exits superuser administrative
mode.
Places the T1 engine in loopback mode.
Displays input and output for a serial port.
Connects to a host using the Telnet
protocol.
Connects to an IBM VM/CMS or MVS host
using the tn3270 variation of the Telnet
protocol. This command is available only if
the network administrator has set the
option_key parameter to the correct value.
Displays Remote Annex users.
Book C-125