Hosts - Nortel 2000 Software Reference Manual

Book C
In the previous sample display, the Command List field applies only to
menus: it lists the commands available from the menu. The following
conditions may restrict command access:
• Superuser commands are not available from a
non-superuser CLI.
• The aliases listed may not be available from a given port.
• Command masks may apply.
• Other restrictions may apply.

hosts

The hosts command displays the names and addresses of hosts and other
Remote Annexes listed in the Remote Annex's host table (known hosts).
The command also displays any status information that a host broadcasts.
Table C-46 describes the arguments for hosts; Table C-47 describes the
status field in the hosts command display. The syntax is:
hosts [–qns] [host][ip_address]
The hosts command display looks like this:
annex: hosts
Host Name Status
alpha --
neon up
calvin down
hobbes down ?
Remote Annex Administrator's Guide for UNIX
Chapter 3
Users Load Internet Addr
-- -- 132.245.6.65
12 0.40 132.245.6.30
16 3.55 132.245.6.128
8 2.01 132.245.6.1
Using the CLI Commands
Book C-149