Nortel 2000 Software Reference Manual page 323

Book C
Parameter
newline_terminal
output_flow_control
output_is_activity
output_start_char
output_stop_char
parity
phone_number
port_password
port_server_security
ppp_acm
ppp_ipx_network
Values Default
Y or N N
eia, start/stop
start/stop,
bell, both,
none
Y or N N
control char. ^Q
sequence
control char. ^S
sequence
even, odd, none
none
32-char string ""
<unset> or <unset>
a string
Y or N N
0x00000000 0x0000000
to 0xffffffff
00000001 to randomly
ffffffff, generatednu
or 0 mber
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
When enabled, a line feed
terminates both the input and the
output line(s). When disabled, on
input, either a CR or a LF
terminates the input line; a CR
followed by a LF terminates
output line(s).
Defines method of flow control
that the terminal uses to stop
output from the Annex.
Defines activity as output.
Defines the character that restarts
output.
Defines the control character
sequence that stops output.
Defines the type of parity that the
device uses.
The phone number for use with
dynamic dialing.
Defines a password for the port
for use with local password
protection.
Enables/disables a host-based
security policy for access to a
port via the port server.
Specifies which of the first 32
characters in a TCP/IP packet
will be escaped before being sent
to the network.
Specifies a 4-byte, Novell
network number the Annex
suggests for the remote PC client
on an IPXCP (IPX over PPP)
link.
Book C-305