Nortel 2000 Software Reference Manual page 186

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-168
The sample topology shown in Figure C-2 is assumed by the ping –t
examples that follow it.
132.254.66.1
132.254.66.2
ping -t
source
Figure C-2. Topology for ping –t Examples
Given the topology in Figure C-2, the ping –t command displays output
such as the following when a traceroute packet passes successfully to the
ping –t destination and back (see Table C-54).
The line numbers at the right of this example are for reference only;
they are not part of the actual display.
annex# ping –t 132.254.33.4
PING hobbes: 56 data bytes
Dir Router
>>> 132.254.99.2
>>> 132.254.33.3
<<< 132.254.99.3
<<< 132.254.66.2
64 bytes from 132.254.33.4: time=10. ms
132.254.99.2
Router 1
132.254.99.3
Hops Speed (b/s)
1 19200
2 10000000
1 19200
2 10000000
132.254.33.3 132.254.33.4
Router 2
ping -t
destination
line 1
MTU line 2
1024 line 3
line 4
1500
1024 line 5
1500 line 6
line 7
Book C