Nortel 2000 Software Reference Manual page 321

Book C
Parameter
ipso_class
ipx_security
ixany_flow_control
latb_enable
line_erase
local_address
location
login_port_password
login_timeout
long_break
Values Default
top-secret, none
secret,
confidential,
unclassified,n
one
Y or N N
Y or N N
Y or N N
Y or N Y
Internet 0.0.0.0
address
string of 1 to ""
16 characters
Y or N N
Y or N N
Y or N Y
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Specifies the U.S. Department
of Defense basic IP Security
Option (IPSO) classification
level included in TCP packets
generated locally on Annex CLI,
dedicated, or adaptive
asynchronous ports.
Controls whether or not IPX
security is enabled on the port.
Treats any input character as a
start (XON) character if output
has been suspended by a stop
(XOFF) character.
Enables the Annex to decode a
LAT host's data-b packet.
Eables/disables echoing line
erase for a CRT.
Defines the Internet address for
the port on the Annex side of the
link.
Defines a string that represents
the port's location.
Enables the port password when
the VMS command interface is
configured (i.e., when
cli_interface is set to vci).
Enables a login timer when the
VMS command interface is
configured (i.e., when
cli_interface is set to vci).
When enabled, the Annex
returns the user to the CLI
prompt after receiving a break
longer than two seconds.
Book C-303